{"product_id":"hammerfield-hammered-skinner-crown-stag","title":"Hammerfield 8\" Hammered Skinner Knife with Crown Stag Handle","description":"\u003cp dir=\"ltr\"\u003eThe Hammerfield records every hammer blow. Its blade keeps the marks of the forge across both faces, a field of small hand-hammered dimples that catch the light. No two blades carry the same pattern of strikes.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eCrown stag closes the butt with its burr intact. No bolster sits anywhere between the antler and blade. The handle runs as one piece throughout, and the antler meets the steel directly.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis hammered skinner knife is for sale as a single piece. It runs 8 inches overall, with a 3.5-inch blade and a 4.5-inch crown stag handle. Compact, natural and built for field work.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.minhasforge.com\/collections\/hunting-knives\"\u003eStag handle hunting knives\u003c\/a\u003e\u003c\/strong\u003e at Minhas Forge with a hand-hammered blade, a crown burr butt and no bolster between antler and steel.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe History Behind This Hammered Skinner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHammered finishes are among the oldest ways to finish a blade. Instead of grinding away every trace of the forge, the smith leaves the hammer marks on the surface on purpose. The texture shows the work that went into the knife.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eCrown stag handles have their own long history on hunting knives. Hunters valued the burr end because it needed little shaping and stopped the hand sliding off. \u003cstrong\u003e\u003ca href=\"https:\/\/www.minhasforge.com\/\"\u003eMinhas Forge\u003c\/a\u003e\u003c\/strong\u003e brings both traditions together in the Hammerfield.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHammered Skinner Knife Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA hammered texture breaks up the flat face of the blade. The small dimples can help reduce sticking on hide and meat compared to a smooth face.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 3.5-inch drop point blade has a gently curving spine and a shallow belly. It gives close control for skinning, caping and trimming around joints.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe crown stops your hand sliding back off the end, and the antler texture does the gripping without any wrap. Layered steel takes a fine edge and holds onto it. Oil the blade and keep the stag dry.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHammerfield Skinner Construction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOne piece of crown stag makes the entire 4.5-inch handle. The crown burr sits untouched at the butt end, and bark texture runs unbroken down to the blade. Nothing is pinned or capped along it. The antler was cut to fit.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA hidden tang runs the length inside the antler. No bolster separates the steel from the stag. The blade carries its hammer dimples across the flats, with the edge ground clean and sharp.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHeat and dry air will both damage antler over time, so keep the knife in a stable indoor room.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBest Uses for the Hammerfield Skinner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eField work and hide dressing both suit this compact blade well. Deer, hog and smaller game sit comfortably in range.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHunters buy crown stag skinners for the crown, and every crown comes out a different shape and size. A stand shows the hammered face off well too.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt suits anyone who appreciates real handwork. Order the Hammerfield Crown Stag Hammered Skinner today. A hand-hammered blade takes far longer than a plain ground one.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Forged hammered skinner knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material:\u003c\/strong\u003e Forged Damascus steel, folded layers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Finish:\u003c\/strong\u003e Hand-hammered texture (not acid etched)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Shape:\u003c\/strong\u003e Drop point with a gently curving spine and shallow belly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Length:\u003c\/strong\u003e 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width at Widest Point:\u003c\/strong\u003e 1.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Material:\u003c\/strong\u003e Crown stag horn, one continuous piece, bark texture intact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButt:\u003c\/strong\u003e Crown burr, untouched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTang:\u003c\/strong\u003e Hidden tang\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge:\u003c\/strong\u003e Hand sharpened, ready to use on arrival\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Minhas Forge","offers":[{"title":"Default Title","offer_id":51685213274418,"sku":null,"price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/4583\/4034\/files\/HandForgedDamascusSteelHuntingKnife1.webp?v=1789190387","url":"https:\/\/minhasforge.com\/products\/hammerfield-hammered-skinner-crown-stag","provider":"Minhas Forge","version":"1.0","type":"link"}