Nakiri Knife

Filters

Sorry, there are no products in this collection

Sort by
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

A nakiri knife is a Japanese-style vegetable knife with a relatively straight edge, rectangular blade, and lowered tip. The name (菜切) means "vegetable cutter," and the shape follows that job: no curve to rock on, no tapered point for piercing, and a tall rectangular face.

Blades usually run 165mm to 180mm (6.5 to 7 inches). Because the entire edge contacts the board at once, one downward push separates a cut cleanly from heel to tip, which is why nakiri knives work through cabbage, daikon, and other bulky produce so quickly.

Shop Nakiri Knives

Explore our nakiri knives for everyday vegetable preparation, including chopping, slicing, dicing, and mincing. Compare different blade lengths, steels, handles, and finishes to find a knife that fits your cooking style and kitchen setup.

Browse the collection to find a nakiri knife suited to your board size, cutting technique, and daily prep needs.

What Is a Nakiri Knife?

A nakiri kitchen knife is a thin, double-bevel Japanese knife made for vegetable prep, with a rectangular blade, a flat edge, and blunt corners where other knives carry a point. It's sharpened evenly on both sides, so it suits left- and right-handed cooks.

Its single-bevel relative is the usuba, a professional knife ground on one face for techniques such as katsuramuki, the rotary peeling of a daikon into a continuous sheet. A Japanese nakiri knife is the double-bevel, home-kitchen version of that idea: easier to sharpen and much more forgiving.

You'll also see it sold as a nakiri chef knife, though it isn't a general-purpose chef knife in the Western sense.

What Do You Use a Nakiri Knife For?

A nakiri knife is used for vegetable preparation, and the purpose of a nakiri knife shows in four kinds of cuts:

  • Straight-down chopping through cabbage, lettuce, and leafy bunches
  • Even slicing of carrots, cucumbers, daikon, and squash into consistent rounds or planks
  • Julienne and brunoise work, where a flat edge produces uniform sticks and dice
  • Herb chiffonade, sliced cleanly because nothing is crushed by a rocking motion
  • The face is roughly 45–55mm tall at the heel, enough to move a full board of diced vegetables to the pan in one or two passes when you turn the blade on its side.

What a nakiri knife is good for: stopping at the vegetable board. Without a point, it can't core a tomato, hull a strawberry, or trim silverskin, so keep a petty knife nearby for that work.

Can You Use a Nakiri Knife to Cut Meat?

Yes, for boneless meat, but it's the wrong tool for most of it. A nakiri slices raw chicken breast, pork loin, or cooked meat well when you're cutting straight down through something already trimmed and boneless.

Where it fails:

  • No point means you can't separate joints, pierce skin, or work around a bone.
  • A thin, hard edge chips on bone, cartilage, and frozen items.
  • No belly means no drawing cut, so slicing a roast takes several extra passes.

The honest answer to "can you use a nakiri knife for meat" is that it manages in a pinch and fails at butchery. For proteins, a gyuto or santoku gives you a usable tip.

When to Use a Nakiri Knife

Reach for it when the job is volume vegetable prep: a board of onions, a cabbage for slaw, stir-fry vegetables, or anything needing uniform pieces. The use of a nakiri knife makes most sense as a second knife that sits beside a general-purpose blade rather than replacing it.

Leave it in the block for carving, boning, bread, and anything needing a point. Browse all chef knives if you're still choosing your main knife.

Choosing Size, Steel, and Handle

Size

165mm suits most home boards and feels quick in the hand. 180mm gives more edge for large cabbages and batch prep, and needs a bigger board to use properly.

Height and balance

A taller face clears your knuckles but adds weight over the edge, which is why a nakiri feels heavier in the cut than its length suggests. Light wa handles shift that balance forward; western handles sit heavier in the hand.

Steel and hardness

Japanese-style nakiris are commonly hardened between 58 and 62 HRC and ground near 15 degrees per side. That geometry cuts with very little downward force and dislikes abuse. Stainless keeps upkeep minimal, while carbon steel takes a finer edge and darkens into a patina. Damascus cladding and hammered tsuchime faces sit over a core steel; both can ease food release, and neither changes how the core cuts.

Nakiri Knife Safety Tips

A tipless knife feels safer than it is. The blade is thinner and harder than a European knife, and usually sharper out of the box.

  • Use a claw grip. Curl your fingertips under and let the flat face ride against your knuckles as a guide.
  • Push, don't rock. Rocking a straight edge makes the blade skid sideways instead of biting.
  • Mind both corners. The squared heel and tip corners are sharp right angles that catch on cloths, cutting mats, and hands reaching across the board.
  • Never twist or pry. Wedging a nakiri into dense squash and levering it free chips the edge.
  • Match the board. Wood or soft polyethylene only; stone, glass, bamboo, and ceramic roll a 15-degree edge within a session.
  • Store it covered. A saya, magnetic strip, or blade guard protects the corners and your fingers in a drawer.

Care for a Straight Edge

Two things matter more on a nakiri than on any curved blade:

Sharpen it evenly end to end

Working the middle harder than the ends creates a low spot, and a straight edge reveals it instantly. Sharpen in full-length passes rather than short strokes, and count your passes on each section so both ends get the same work.

Test it with light

Rest the sharpened edge on a flat surface and look along it. Any light visible under the middle means the edge has gone concave and needs the ends brought down to match. Catching this early takes minutes; leaving it costs an hour of stone work.

Protect the corners

Both corners meet the board first and chip before the edge does. If a corner snags on cloth, take the sharpness off it with two or three light strokes rather than leaving it square.

Frequently Asked Questions

Vegetable prep: chopping, even slicing, julienne, and herb work, all with a straight downward motion rather than rocking.

A nakiri is flatter and tipless, so it handles bulk vegetable work more cleanly. A santoku's slight curve and tip make it more versatile across meat and fish.

Not entirely. It handles vegetables better but can't pierce, trim, or carve, so most cooks keep it as a second knife.

The squared corners and thin edge chip on bone, frozen food, and hard boards. Straight downward cuts on wood cause no problems.

165mm suits most home kitchens. Choose 180mm only if you regularly prep large volumes and have the board space

Shop With Confidence

HandCrafted Quality

Build to last generations

Fast Shipping

Worldwide Orders

Secure Payments

100% Safe & Secure

24/7 online support

Always Here to Help